Stick2 All Purpose Contact Adhesive Beige

STICK 2 ALL-PURPOSE CONTACT ADHESIVE is a brushable, general purpose contact adhesive with fast setting properties coupled with long open time.

Benefits

Excellent adhesion – adheres to most common surfaces.
Exceptional bond strength – out performs conventional wood glues.
Internal and external use (excluding 5ltr size) – excellent weathering and aging properties.
Areas For Use

Laminate materials
Bonding pu foam or mineral wool panels to plasterboard.
Bonding metals to most surfaces.
Bonds wood, rubber, most plastics and leather, cork, lino, rigid PVC, dense
Surface Preparation

The surfaces to be glued should be clean and free from dust, grease and other contaminants. Materials should be stored in a warm environment prior to bonding to avoid chilling of the glue line, which leads to extended setting times and possible adhesion problems.

Application

Stir adhesive well before use. DO NOT USE BELOW 10°C.

The adhesive is applied to both surfaces in a thin coat using a short stiff brush or spreader. When the surfaces become “touch dry” (ie adhesive is glossy and no longer transfers to the knuckles) for between 10 and 20 minutes. Porous surfaces must receive two coats allowing the adhesive to dry coats. Align the bond edges and bond under maximum pressure. For best results, laminates should be nip rolled or pressed. If this is not possible, use a hard roller and go over the entire surface using as much bodyweight as possible, working from the centre outwards. Seams and edges should also receive extra pressure.

The newly bonded material should not be subjected to extreme temperature changes for 3 to 4 days after bonding. Avoid further fabrication until the adhesive has fully cured.