Tetrosyl Easy Spray 400ml Satin White

Preparation:
• Ensure surface is clean and dry
• If surface to be sprayed is glossy, lightly sand with fine abrasive paper to ensure a good key
for the paint.
• Tetrosyl Easy Spray can be used on its own but to ensure a long lasting high quality finish
on metal and particularly on flexible plastic, first apply a primer.
• If paint surface is unknown test compatibility on a small inconspicuous area similar to that
being sprayed.
Colour Application & Drying Times:
• Shake can for a minimum of two minutes.
• Hold can 20-30 cm (8-12 inches) from surface. Spray in alternate horizontal and vertical
strokes.
• Apply several coats, allowing each coat to become tacky between applications
(approximately 10 minutes). Shake can in between applications
• Regularly invert can and spray to remove paint from nozzle. On completion of use, invert
can and spray to remove paint from nozzle. Clean any dried paint from nozzle with a pin.
• Tetrosyl Spray is touch dry in 10 minutes. Leave for 24 hours to harden. For extra protection
or a gloss finish use Tetrosyl Clear Finish as a topcoat. When painting plastics use Tetrosyl
Plastic Primer to avoid flaking