Sale!
bond-it

Bond It Wood Pro Strong Flexible Wood Flooring & Parquet Hybrid Adhesive Sealant

Product code: BDWPROBF | Barcode: 5060021369802

 (Inc VAT) Each pack £3.24 (Inc VAT)  each pack

A permanently flexible, one part, ready to use, moisture cure, internal wood flooring adhesive supplied in a plastic cartridge. Free from silicone, solvent, isocyanates and water. Based on hybrid polymer technology; Wood Pro reduces the risk of warping or deforming the wood flooring due to its moisture and solvent free composition.

29 in stock

 

PRODUCT FEATURES

Properties

– Solvent and Moisture Free

– Quick Cure and Rapid Bond Strength

– Permanently Elastic

– Suitable for use with Underfloor Heating

Uses

For the internal bonding of parquet, mosaic, oak,

wood block, laminated, exotic timber and many other

wood floor types to porous or non porous substrates

including; screeds, chipboard, plywood, concrete

and anhydrite. WOOD PRO is also compatible with

substrates incorporating under-floor heating

systems.

Preparation

All surfaces must clean, dry and free from, grease,

polish, old adhesive remnants or any other

contaminates that may hinder adhesion. Loose,

friable or cracked areas should be repaired prior to

application. The moisture content throughout the

substrate should be checked by Hygrometer,

ensuring that the moisture content does not exceed

that recommended by the wood flooring

manufacturer for the particular substrate. In

particular Anhydrite levels would differ to those of

concrete. The wood flooring should also be checked

that the relative humidity figure falls within those

recommended by the manufacturer. Note; underfloor

heating systems should be turned off 48 hours

before and 48 hours after application. All wood

flooring should be acclimatised for several days in

the room where it is to be installed.

Application

The application temperature should not be below

+10o

C and not above +30o

C, materials should be

acclimatised to this temperature in the intended

application site prior to installation. Solid floors

should have an existing DPM in place.

Use the notched nozzle provided for maximum

transfer. Apply the adhesive to the substrate in a

triangular bead 8mm wide by 10mm high and at

250mmcentres at right angles to the length of the

wood. Do not apply more adhesive than will be used

within 20 minutes of application. To ensure

maximum transfer of adhesive to the wood, lay into

the adhesive with a slight twisting motion and tap

into place.

WOOD PRO will take at least 24 hours to cure

assuming a temperature of 23OC at 50% RH. Cooler

and / or less humid conditions will extend drying

times. Wait until the adhesive has fully cured before

sanding or finishing the flooring.

DELIVERY & RETURNS

Delivery Information
We aim to process all orders placed by 11 am on Mon-Fri (working days) on the same day.
Standard UK Delivery 3 to 5 working days £3.99
Next Day Delivery Orders placed before 11 am (Mon - Fri). £5.99
Standard UK Delivery - 3 to 5 working days £3.99
Next Day Delivery - Next working day if ordered before midday. Orders placed before 1pm (Mon - Fri) £5.99
Saturday Delivery - Orders placed before 1pm (Fri). Next working day if ordered before midday. £25
Find more about Delivery
Return of Goods
We will happily refund or exchange any item purchased through us. Our aim is to provide you with the highest levels of service possible and to make the return process as easy as possible. Our Return Process is as follows
  • Simply inform us of any return within 30 days of the original order date.
  • Please provide the return order number for quick refund process.
Find more about Returns Policy

Excellent

Based on 120 reviews

EXPRESS DELIVERY

On all orders over £45 (Exc. VAT)

EASY RETURNS

Express Shipping & Effortless Returns

SECURE PAYMENTS

Secure Online Payments with Cardstream