SAVES NAILS is a fast bonding adhesive with gapfilling properties to bridge gaps up to 12mm. It can
be used in all weather conditions and is suitable for
rough and porous surfaces. It has good low
temperature resistance for freezers and cold
applications. This product is toluene free.
Bond It SAVES NAILS is ideal for fixing a wide
variety of materials to all types of walls and suitable
for insulating PU foams. It can also be used to fix
skirting boards, door surrounds and frames,
window sills, all types of cladding, wall battens,
decorative wall boards, metal carpet edges,
automotive trims and much more. It can be used for
interior and exterior applications.
SAVES NAILS is ideal for use on:
- brick u some plastics*
- timber u marble
- stone u brick veneer
- concrete u metal
* Solvent attack can occur with some plastics so
test suitability before use.
Ensure all surfaces are clean, dry and free from
grease or any contaminants that may hinder
Apply using a standard sealant gun with the nozzle
cut at an angle of 45°, and to an opening slightly
larger than the joint to be sealed. Apply a 6mm
bead (or thicker to suit gap) in a zig zag along one
length of the item to be fixed. Press into place and
apply an even pressure on the entire surface, leave
to cure for 48 hours. Temporary support or fixings
are recommended on very heavy items whilst
Bracing or additional mechanical fastening is
recommended for ceiling or heavy wall panels
while the adhesive develops full strength. When
bonding foam to ceiling additional mechanical
fastenings are to be used. Excessive material
can be removed using white spirit or cellulose
thinners. Clean tools immediately after use.
- Not suitable for areas subject to frequent water immersion.
- Not recommended for use on asphalt, bitumen or polystyrene.
- Not to be used as a mirror adhesive.
- Dusty or porous surfaces should be primed with a primer prior to application consult our technical department for details.
EU3 polyamide cartridge.