Bond It Gripbond Pro Contact Glue Adhesive Has 4 X Initial Grab Of Most Glues

Properties

• For interior and exterior use
• Weather proof
• Solvent-free and odourless
• Quick curing
• Can be over painted
• Can be applied to wet surfaces

GRIPBOND PRO MAX typically has double the

initial grab of most grab adhesives, eliminating the

need for mechanical support in most applications.

Typical bond strength: 250Kg/m2

. It has a high

ultimate bond strength and is suitable for internal

and external use, in all weather conditions. Superb

adhesion qualities even on wet surfaces. Quick

curing, weather resistant, isocyanate, solvent and

acid-free making it safer to use. Remains fully

elastic.

Uses

Suitable for use on metal, wood, glass, stone,

polystyrene, concrete, plasterboard, insulation

board, ceramics, polyester and many more

surfaces.

Application

Ensure all surfaces are clean and free from grease,

oil or any other contaminants that may hinder

adhesion. Carefully cut the tip of the cartridge,

taking care not to damage the threaded area.

Screw on the “notched” nozzle attached and place

cartridge in a standard sealant gun. Apply in beads

or strips to one surface only, and bond the

surfaces together carefully and allow to cure.

Remove any uncured adhesive with white spirit.

Note: this product is not recommended for

installations where joints are permanently

immersed in water or on surfaces that bleed oils

or plasticisers. If used on overhead applications,

always use in conjunction with mechanical fixings.

It is recommended for large mirrors but it should be

used in conjunction with mechanical fixings. For

large and/or heavy items provide temporary

support until full cure is achieved. Not suitable for

use on polypropylene or Teflon.

Overpaintable, however as quality and type of

paint can vary,

Colour

Available in white.