PRODUCT FEATURES
Properties
- For interior and exterior use
- Weather proof
- Solvent-free and odourless
- Quick curing
- Can be over painted
- Can be applied to wet surfaces
GRIPBOND PRO MAX typically has double the
initial grab of most grab adhesives, eliminating the
need for mechanical support in most applications.
Typical bond strength: 250Kg/m2
. It has a high
ultimate bond strength and is suitable for internal
and external use, in all weather conditions. Superb
adhesion qualities even on wet surfaces. Quick
curing, weather resistant, isocyanate, solvent and
acid-free making it safer to use. Remains fully
elastic.
Uses
Suitable for use on metal, wood, glass, stone,
polystyrene, concrete, plasterboard, insulation
board, ceramics, polyester and many more
surfaces.
Application
Ensure all surfaces are clean and free from grease,
oil or any other contaminants that may hinder
adhesion. Carefully cut the tip of the cartridge,
taking care not to damage the threaded area.
Screw on the “notched” nozzle attached and place
cartridge in a standard sealant gun. Apply in beads
or strips to one surface only, and bond the
surfaces together carefully and allow to cure.
Remove any uncured adhesive with white spirit.
Note: this product is not recommended for
installations where joints are permanently
immersed in water or on surfaces that bleed oils
or plasticisers. If used on overhead applications,
always use in conjunction with mechanical fixings.
It is recommended for large mirrors but it should be
used in conjunction with mechanical fixings. For
large and/or heavy items provide temporary
support until full cure is achieved. Not suitable for
use on polypropylene or Teflon.
Overpaintable, however as quality and type of
paint can vary,
Colour
Available in white.
