Barrettine – Wood Protective Treatment – Light Brown – 5L

Barrettine’s wood protector is a wood Sealer For rough, sawn or smooth timber. It contains water repellent resins And a Biocide film wood Preserver to prevent the surface growth of mould/algae and together This helps reduce decay, swelling, twisting of wood. Pigments have good UV fade resistance and Will help protect wood from UV damage. Barrettine’s wood protector is an ideal treatment for outdoor treated timber structures such as sheds, fences, trellis, pergola and timber gazeboes. As a wood Sealer it provides good water repellence/beading. Oil/spirit based for deeper penetration leaving a transparent/translucent finish colour effect to wood, where the grain texture is still visible. (Not ideal for decking or garden furniture structures as rub resistance may not be sufficient).

Directions

1. Ensure wood to be treated is dry, free from dirt and repellent coatings such as paint or varnish. (remove and sand down as required). Recommend using a biocidal wash such as Barrettine Knockout Mould and Mildew prior to treatment. 2. Stir the product well before use. 3. Apply the product using a brush, roller, or spray in suitable conditions (when used outdoors make sure weather conditions are dry and still). If spraying, use an airless sprayer such as a Wagner or Graco ideally using a minimum 1mm flat fan tip nozzle (9 – 11 thou tip). The sprayer must be thoroughly cleaned after application with white spirit and then oiled to protect the tip and moving parts (as per manufacturer’s instructions). This product cannot be sprayed with a traditional pump action garden sprayer. 4. Allow the first coat to dry for 12 hours under normal conditions (20°C/65% rel. humidity). 5. Apply 2-3 applications/coats for best results. 6. Clean equipment with Barrettine White Spirit.