PRODUCT FEATURES
Uses
Bond It SILICONE RELEASE SPRAY can be used for
conveyors in the food and drink industry where a
food safe non emulsifying lubricant is required. The
moulding industry to improve productivity and ease
of release. Textile industry where a clean non
staining lubricant is required. Automotive to prevent
door gaskets sticking and interior trim squeaks. This
product will not attack painted surfaces or plastics.
Application
Spray in short bursts on to the surfaces that require
lubrication, wipe away excess with a soft cloth.
For mould release applications remove any material
from the mould, spray uniformly paying particular
attention to corners and areas of fine detail. Ensure
all surfaces have received a coating, the silicone can
be gently spread using a soft non woven cloth. Best
results will always be achieved from moulds with
smooth unpitted finishes.
Limitations
Do not use on surfaces to be painted as silicone
may induce surface irregularities in the paint. For
polystyrene, first spray the release onto a cloth and
apply by hand to protect the polystyrene from the
propellant.
Storage Conditions
Store below 30°C in a dry, well ventilated place
away from sources of heat, ignition and direct
sunlight. No smoking. Observe the label precautions.
SILICONE RELEASE SPRAY must be stored in
accordance with the flammable liquid storage
regulations.
Disposal of Containers
Do not leave empty containers where residue
could be harmful to children, animals or the
environment. Replace lids and remove any
containers to a central disposal point in
accordance with local regulations. Do not
pierce canister.
Spilt material should be mopped up
immediately with an absorbent cloth and a
suitable solvent cleaner.
